IP44 200X80mm Ec 48V DC Brushless External Compact Axial Fans

• Material: Aluminum Fan
• Blade Material: Plastic
• Type: Axial Fan
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: PA3N200B48H
• Electric Current Type: DC
• Mounting: Free Standing
• Certification: RoHS, CE
• Name: 200X70mm DC Industrial Tube Axial Fan
• Category: Ventilation Equipment
• Motor Type: Ec Brushless External Rotor Motor
• Bearing Type: Ball Bearing
• Fan Feature: 0~10VDC/PWM Speed Control, Tach Output
• Rated Voltage: 48 VDC
• Power: 43.2 W
• Speed: 2750rpm
• Transport Package: Standard Exporting Package
• Specification: 200x70mm
• Trademark: PBM
• Origin: Suzhou, Jiangsu
• HS Code: 8414599050
• Production Capacity: 50, 000PCS/Year
• Package Size: 34.00cm * 34.00cm * 24.00cm
• Package Gross Weight: 2.900kg

Product Description

IP44 200X80mm Ec 48V DC Brushless External Compact Axial Fans
Model No.: PA3N200B48H

1.General Characters

Model	PA3N200B48H
Rated Voltage	48 VDC
Operating Voltage	36~57 VDC
Rated Speed	2750 RPM
Input Current	0.9 A
Input Power	43.2 W
Air Flow	1150 m^3/H
Static Pressure	236 Pa
Sound Level	60 dB(A)
Protection Type	IP44

2.Mechanical Characters

Dimension	200mm X 200mm X 80mm (see dimension drawing)
Material of Impeller	Cold rolled steel sheet
Mounting Position	Any
Surface of Rotor	Coated in black
Bearing System	NMB ball bearing
Lead Wire	D1
Weight	2400g
Package	Standard

3.Environmental Characters

Locked-rotor Protection	Over-current limiting circuit protects motor from damage at least for 72 hours of locked rotor condition at rated voltage.
Maximum Current under Locked Rotor	A, Typical inrush current when the motor is trying to re-start under locked rotor conditions is 2~4 times the normal running current reoccurring and for 16~20% of restarting cycle period. B, If he CL function is used this restarting inrush current is about the same as the normal running current.
Reverse Polarity Protection	No damage if the positive and negative leads are reversed under maximum operation voltage conditions.
Over Voltage Protection	The circuit will be shut down automaticlly when input voltage over threshold. And re-started when Voltage down to threshold below.
Soft Start	In 5 seconds after power on and speed control voltage gets to 1.5V or PWM duty cycle at 10% above.

Related Products
                                                                        
                                                                                   
       FOB Price:US $51.4-57.4/Piece                         FOB Price:US $40.7-45.5/Piece                          FOB Price:US $51.2-57.2/Piece                                 FOB Price:US $52-58/Piece               
                                                                                                                                                                                                                                   
                                                                                                  
      FOB Price:US $53.1-59.3/Piece                        FOB Price:US $49-56/Piece                                   FOB Price:US $45.2-48.88/Piece                          FOB Price:US $73.95-75.78/Piece   
                                                                                                                                                   
Application Scopes:Ventilation & Purification / Air Conditioning / Refrigeration /  IT & Electronic Industry / Medical Industry / Heating / Automotive Industry / Household Electric Appliances / Cloud Date Center / Mechanical Equipment and Systems.
Partners:Galanz / Systemair / Nuaire / MCRT  Certificate Show:UL / CE / Rohs
About PBM:High Quality EC Fan / Competitive Price / Strong Team / Long Life Expectance / Fast Delivery / Customization Available / Attentive Service / Professional Assistance
Laboratory / Packing Method / Workshop / Warehouse


FAQ
Electronically Commutated Motors (EC Motors) also known as Brushless DC Motors (BLDC) are synchronous electric motors powered by direct-current (DC) electricity and having electronic commutation systems, rather than mechanical commutators and brushes. The current-to-torque and voltage-to-speed relationships of BLDC motors are linear.
As mentioned EC Motors are always synchronous & the conventional AC motors are not synchronous.
This is explained in more detail below:
A 2 pole motor @ 50 Cycle will run slightly below 3000rpm, whilst a 4 pole motor @ 50 Cycle will run slightly below 1500rpm - this difference in speed is commonly known as the 'slip'.
Although the efficiency on a conventional AC Shaded Pole motor can be relatively good at or near this normal slip, as the motor is forced down in speed to increase this slip, the efficiency can drop away dramatically with the majority of the wasted electrical energy being turned into heat emanating from the motor coils. This has a detrimental affect on the life of the bearings and necessitates thermal devices to be added to the coils to ensure safety and prevent electrical insulation fatigue.
The further we reduce the speed of the AC Shaded Pole Motor below its optimum full speed point, the more difficult it becomes to stabilize the speed and it is not uncommon for this type of motor to hunt between two speeds.

               
An Electronically Commutated DC motor (EC) will always run at synchronous speed, with the motor coils being close loop controlled. That is unless there are other external controls; the motor speed is controlled only by the motor design and application load. Although the efficiency does vary with speed, the variation is small as compared with an AC Shaded Pole Motor.

Unfortunately, EC motors are inherently more expensive to produce due to the addition of an el ronic commutation circuit, however, with advances and demand in the semi-conductor marketsincreasing, the controls are often straightforward and relatively low cost.
Frequently Asked Question
Q: What are electronically commutated motors?
Electronically Commutated motors are brushless DC motors where the direction of the electric current is switched using electronic controllers. As the switching of the current is technically known as 'commutating', brushless motors are also called 'electronically commutated' motors. EC motors provide the advantages of brushed DC motors in terms of the ability to have variable speed control, but without the drawbacks of brushes.
Q: What are the advantages of EC motors?
EC motors are very high efficiency electric motors (80%) and maintain a high efficiency level at part speed. This means that in most cases they use less than one third to half of the electricity used by                    traditional induction motors, which in turn translates into lower operating costs and short payback periods. As EC motors have a higher efficiency this ensures that the motors run cooler in application which ensures a longer life for the motor.
In terms of speed control and features, because the motor's operation is controlled by software, EC motors allow customers to optimize and integrate the motor, fan and controller with the application, and to include features like data communications, constant volume control, variable speed.
Features & Advantages
Q: What about cost?
The initial outlay for an EC motor is more expensive than the traditional induction / shaded pole motors and this is mainly due to the electronic components required to drive the commutation. In recent years the cost of electronic components has reduced dramatically as volumes increase.
The huge energy savings provided by EC motors, mean equally large savings in operating costs, which in turn translate in payback periods as short as a few months combined with a longer life expectancy.
In our case, together with high energy savings, low use of raw material, low part count and simple electronics, have allowed us to make our motor price very competitive.
Q: How are EC motors 'sustainable'?
The huge energy savings provided by our EC motors directly translate into large carbon emissions savings.
By using an EC motors in your application we are able to assist our customers in dramatically reducing the air pollution (CO2) generated by their applications. This is due to the motors high efficency & low energy costs which helps to preserve the world for a 'greener' future.
EC Motors are designed & manufactured using 70% less copper and 80% less steel than traditional induction and shaded pole motors which has a dramatic reduction in environmental impact in producing these raw material components.
services to the clients.
Contact Us
We highly appreciate your any enquiry by email, call or instant message.